DOI:
https://doi.org/10.14483/2256201X.20917Publicado:
27-06-2024Número:
Vol. 27 Núm. 2 (2024): Julio-diciembreSección:
Artículos de investigación científica y tecnológicaElaboración de papel con fibra virgen y reciclada reforzada con celulosa nanofibrilada de Guadua angustifolia
Elaboration of paper with virgin and recycled fiber reinforced with nanofibrillated celullose from Guadua angustifolia
Palabras clave:
Aditivo de papel, bambú , CNF, fibras recicladas, industria papelera (es).Palabras clave:
Paper additive, bamboo, NCF, recycled fibers, paper industry (en).Descargas
Resumen (es)
La nanocelulosa ha demostrado prometedoras mejoras en las propiedades tecnológicas de diversos productos dentro de la industria papelera. El objetivo de esta investigación fue evaluar la influencia de la celulosa nanofribrilar (CNF) de bambú (Guadua angustifolia Kunth.) en las propiedades físico-mecánicas de papel elaborado con fibra virgen de bambú, fibras recicladas de Double Kraft Liner (DKL) y una mezcla de ambas. La CNF fue obtenida mediante TEMPO a una desfibrilación de 25 000 RPM. Luego, fue adicionada en concentraciones de 0, 2, 4 y 6 % para cada tipo de papel. Los resultados, analizados estadísticamente, demostraron que el espesor, la permeabilidad y la resistencia al rasgado disminuyeron, mientras que la densidad y la resistencia a la tensión y al plegado presentaron un aumento conforme se incrementaba la concentración de CNF. Debido a las características de la CNF, el potencial uso del papel elaborado con este aditivo es el de envoltura para alimentos.
Resumen (en)
Nanocellulose has shown promising improvements in the technological properties of various products within the paper industry. The aim of this research was to evaluate the influence of nanofibrillar cellulose (NCF) from bamboo (Guadua angustifolia Kunth.) on the physical-mechanical properties of paper made with virgin bamboo fiber, recycled fibers from Double Kraft Liner (DKL), and a mix of both. The NCF was obtained by means of TEMPO at a defibrillation of 25 000 RPM. Then, it was added in concentrations of 0, 2, 4, and 6% for each type of paper. The results, which were statistically analyzed, demonstrated that thickness, permeability, and tear resistance decreased, while density and resistance to tension and folding increased as the NCF concentration increased. Due to the characteristics of NCF, the potential use of the paper made with this additive is food wrapping.
Referencias
Aguilar, N. (2004). Celulosa blanqueada ECF y TCF de cartón Kraft reciclado. Revista mexicana de ciencias forestales 27(91), 83-96. http://cienciasforestales.inifap.gob.mx/index.php/forestales/article/view/910
Altez, A., Cárdenas, A., Araujo, M., & Sulbarán, B. (2020). Fungal rot effect on physical and mechanical properties of the bamboo-polypropylene composite. Revista Mexicana de Ciencias Forestales, 11(62), 757. https://doi.org/10.29298/rmcf.v11i62.757
Arango-Pérez, S. A., Gonzales-Mora, H. E., Ponce-Alvarez, S. P., Gutarra-Espinoza, A. A., & Cárdenas-Oscanoa, A. J. (2023). Assessment of cellulose nanofibers from bolaina blanca wood obtained at three shaft heights. Maderas: Ciencia y Tecnolología, 26, 1-16. https://doi.org/10.22320/s0718221x/2024.18
Área, M. C., & Vallejos, M. E. (2016). Bio-productos y bio-materiales a partir de la biorrefinería de residuos agro y forestoindustriales. En M. C. Area & M. E. Vallejos (Eds.), Panorama de la industria de celulosa y papel y materiales lignocelulósicos (pp. 120-151). Universidad Nacional de Misiones.
Azeez, M. (2018). Pulping of non-woody biomass. En S. Newaz (Ed.), Pulp and Paper Processing (pp. 55-86). IntechOpen. http://dx.doi.org/10.5772/intechopen.79749
Bahar, N., Hidayat, T., Elyani, N., & Rostika, I. (2016). The potential of nanocellulose from Acacia mangium pulp for specialty paper making. Jurnal Selulosa, 3(1), 1-8. https://doi.org/10.25269/JSEL.V3I01.38
Balea, A., Blanco, A., Monte, M. C., Merayo, N., & Negro, C. (2016). Effect of bleached eucalyptus and pine cellulose nanofibers on the physico-mechanical properties of cartonboard. BioResources, 11(4), 8123-8138. https://doi.org/10.15376/biores.11.4.8123-8138
Balea, A., Sánchez, J., Monte, M., Merayo, N., Negro, C., & Blanco, A. (2019). In Situ Production and Application of Cellulose Nanofibers to Improve Recycled Paper Production. Molecules, 24(9), 1800. https://doi.org/10.3390/moleules24091800
Borges, F., Colodette, J., & Gomes, F. (2018). Utilização do bamboo como matéria-prima na obtenção de polpa celulósica voltada à fabricação de papel de embalagem sackraft. The Journal of Engineering and Exact Sciences, 4(4), 0405-0411. https://doi.org/10.18540/jcecvl4iss4pp0405-0411
Bousios, S., & Worrell, E. (2017). Towards a multiple input-multiple output paper mill: Opportunities for alternative raw materials and sidestream valorisation in the paper and board industry. Resources, Conservation and Recycling, 125, 218-232. https://doi.org/10.1016/j.resconrec.2017.06.020
Cuellar, A., & Muñoz, I. (2010). Fibra de guadua como refuerzo de matrices poliméricas. Dyna, 77(162), 137142. https://revistas.unal.edu.co/index.php/dyna/article/view/15843
Das, A., Islam, M., Ashaduzzaman, M., & Nazhad, M. (2020). Nanocellulose: Its applications, consequences and challenges in papermaking. Journal of Packaging Technology and Research, 4, 253-260. https://doi.org/10.1007/s41783-020-00097-7
Delgado, M. (2015). Nanotecnología en el sector papelero: mejoras en calidad y permanencia de las fibras de alto rendimiento y secundarias en una economía circular mediante el uso de nanofibras y el refino enzimático [Tesis de Doctorado]. Universidad de Girona.
https://dugi-doc.udg.edu/bitstream/handle/10256/11737/tmda1de1.pdf?sequence=5
Delgado, M., González, I., Tarrés, Q., & Alcalá, M. (2015a). Approaching a low-cost production of cellulose nanofibers for papermaking applications. BioResources, 10(3), 5345-5355. https://doi.org/10.15376/biores.10.3.5345-5355
Delgado, M., Recas, E., Puig, J., Arbat, G., Pereira, M., Vilaseca, F., & Mutjé, P. (2015b). Aplicación de celulosa nanofibrilada, en masa y superficie, a la pulpa mecánica de muela de piedra: una sólida alternativa al tratamiento clásico de refinado. Maderas: Ciencia y Tecnología, 17(2), 293-304. http://dx.doi.org/10.4067/S0718-221X2015005000028
Delgado, M., Tarrés, Q., González, I., Àngels, M., Pèlach, P. F. y Mutjé, P. (2016). Nano y biotecnología en el sector del reciclado del papel: avanzando hacia una economía circular. En M. Area y S. Park (Eds.), Panorama de la industria de celulosa y papel y materiales lignocelulósicos (pp.152-179). Universidad Nacional de Misiones.
Díaz, S., Mora, H. G., Gacitúa, W., Bustos, C., Reyes-Contreras, P., & Aguayo, M. G. (2024). Maximizing bolaina wood utilization: extraction of cellulose nanofibers from sawdust waste. European Journal of Wood and Wood Products, 82, 1037-1047. https://doi.org/10.1007/s00107-024-02061-7
Djafari, S., Syverud, K., Chinga-Carrasco, G., Ghasemain, A., & Resalati, H. (2014). Effects of bagasse microfibrillated cellulose and cationic polyacrylamide on key properties of bagasse paper. Carbohydrate Polymers, 99, 311-318. https://doi.org/10.1016/j.carbpol.2013.07.073
Dufresne, A. (2019). Nanocellulose Processing Properties and Potential Applications. Current Forestry Reports, 5, 76-89. https://doi.org/10.1007/s40725-019-00088-1
Eichhorn, S., Dufresne, A., Aranguren, M., Marcovich, N., Capadona, J., Rowan, S., Weder, C., Thielemans, W., Roman, M., Renneckar, S., Gindl, W., Veigel, S., Keckes, J., Yano, H., Abe, K., Nogi, M., Nakagaito, A., Mangalam, A., Simonsen, J., Benight, A., Bismarck, A., Berglund, L., & Peijs, T. (2010). Review: Current international research into cellulose nanofibres and nanocomposites. Journal of Materials Science, 45(1), 1-33. https://doi.org/10.1007/s10853-009-3874-0
Giri, J., & Adhikari, R. (2013). A brief review on extraction of nanocellulose and its application. Bibechana, 9, 81-87. https://doi.org/10.3126/bibechana.v9i0.7179
Hubbe, M., Ferrer, A., Tyagi, P., Yin, Y., Salas, C., Pal, L., & Rojas, O. (2017). Nanocellulose in thin films, coatings, and plies for packaging applications: A review. BioResources, 12(1), 2143-2233. https:/doi.org/10.15376/BIORES.12.1.2143-2233
Hurtado, S. (2017). Estandarización del proceso de obtención de fibra de Guadua angustifolia Kunth como materia prima para material compuesto [Tesis de pregrado]. Universidad Santo Tomás.
https://repository.usta.edu.co/handle/11634/10718
Ioelovich, M. (2009). Nano-structural concept of papermaking. SITA, 11(1), 52-60. http://www.escm.eu.org/docs/eccm13/posters/201.pdf
Josset, S., Orsolini, P., Siqueira, G., Tejado, A., Tingaut, P., & Zimmermann, T. (2014). Energy consumption of the nanofibrillation of bleached pulp, wheat straw and recycled newspaper through a grinding process. Nordic Pulp & Paper Research Journal, 29, 167-175. DOI: 10.5281/zenodo.32932
Kasmani, J., & Samariha, A. (2019). Effect of nano-cellulose on the improvement of the properties of paper newspaper produced from chemi-mechanical pulping. BioResources, 14(4), 8935-8949. https://doi.org/10.15376/biores.14.4.8935-8949
Kim, K., Lee, J., Jo, H., & Kim, S. (2019). Cellulose nanofibril grades effect on the strength and drainability of security paper. Bioresources, 14(4), 8364-8375. https://doi.org/10.15376/biores.14.4.8364-8375
Lázaro, L., Gonzáles, H., & Cárdenas, A. (2016). Mechanical properties of the composite material made with bamboo (Guadua angustifolia Kunth) and polypropylene. Revista Mexicana de Ciencias Forestales, 7 (38). https://doi.org/10.29298/rmcf.v7i38.7
Lengowski, E. (2016). Formation and characterization of films with nanocellulose [Tesis de doctorado]. Federal University of Paraná. https://doi.org/10.13140/RG.2.2.13458.86722
Lengowski, E., Bonfatti, E., Nishidate, M., Carneiro, M., & Gundappa, K. (2019). Nanocellulose in the paper making. Springer. https://doi.org/10.1007/978-3-030-05399-4_361027-1065
León, C., & Fuentes, M. (2012). Diseño de un proceso para la fabricación de papel reciclado ecológico a escala laboratorio usando peróxido de hidrógeno [Tesis de pregrado]. Universidad de Cartagena.
https://repositorio.unicartagena.edu.co/handle/11227/112
Li, A., Xu, D., Luo, L., Zhou, Y., Yan, W., Leng, X., Dai, D., Zhou, Y., Ahmad, H., Rao, J., & Fan, M. (2021). Overview of nanocellulose as additives in paper processing and paper products. Nanotechnology Reviews, 10(1), 264-281.https://doi.org/10.1515/ntrev-2021-0023.
López, M. A., Cevallos, M., Alcívar, J., Dueñas, E., & Riera, M. A. (2021). Residuos del banano (Musa paradisiaca) como materia prima alternativa en la elaboración de papel. Revista Colón Ciencias, Tecnología y Negocios, 8(1), 35-46. https://revistas.up.ac.pa/index.php/revista_colon_ctn
Lourenço, A., Gamelas, J., Sarmento, P., & Ferreira, P. (2020). A comprehensive study on nanocelluloses in papermaking:Tthe influence of common additives on filler retention and paper strength. Cellulose, 27, 5297-5309. https://doi.org/10.1007/s10570-020-03105-w
Mabee, W. (1999). La importancia de las fibras recuperadas para el suministro mundial de fibra. https://www.fao.org/4/w7990s/w7990s06.htm
Niemi, P. (2018). Papel de envoltura ligero para alimentos con resistencia mejorada a las grasas (Patente de España. N° 2, 684, 693). Oficina Española de Patentes y Marcas. https://patentimages.storage.googleapis.com/e8/e4/a5/3e827ba882ef7a/ES2684693T3.pdf
Osong, S. (2016). Mechanical pulp-based nanocellulose: Processing and applications relating to paper and paperboard, composite films, and foams [Tesis de doctorado]. Mid Sweden University.
https://www.diva-portal.org/smash/record.jsf?pid=diva2%3A1033818&dswid=5546
APark, C., Han, S., Namgung, H., Seo, P., & Lee, S. (2017). Overview of the Preparation Methods of Nano-scale Cellulose. Journal of Korea, 49(1), 9-17. http://dx.doi.org/10.7584/JKTAPPI.2017.02.49.1.9
Pego, M., Bianchi, M., & Yasumura, P. (2020). Nanocellulose reinforcement in paper produced from fiber blending. Wood Science and Technology, 54, 1587-1603. https://doi.org/10.1007/s00226-020-01226-w
Pélach, M., & Mutjé, P. (2012). Reciclado celulósico: proceso de desintegración o pulpeado. RIARREC.
Potulski, D., Viana, L., Namikata, A., Braz, M., Bolzon, G., & Sulato, A. (2018). Nanocelulose aplicada como reforço para papel reciclado. Scientia Forestalis, 46(119), 495-505. http://dx.doi.org/10.18671/scifor.v46n119.16
Reshmy, R., Philip, E., Paul, S., Madhavan, A., Sindhu, R., Binod, P., Pandey, A., & Sirohi, A. (2020). Nanocellulose-based products for sustainable applications: Recent trends and possibilities. Reviews in Environmental Science and Bio/Technology, 19, 779-806. https://doi.org/10.1007/s11157-020-09551-z
Rubio, M. F. (2018). Pulpa química, método soda antraquinona, a partir de tallos de Guadua angustifolia y Bambusa vulgaris [Tesis de pregrado]. Universidad Nacional Agraria la Molina.
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007). Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose. Biomacromolecules, 8(8), 2485-2491. https://doi.org/10.1021/bm0703970
Samyn, P., Barhoum, A., Öhlund, T., & Dufresne, A. (2018). Review: Nanoparticles and nanostructured materials in papermaking. Journal of Materials Science, 53, 146-184. https://doi.org/10.1007/s10853-017-1525-4
Sánchez, L., Aita, G., Robert, D., & Rodríguez, M. (2014). Correlation between chemical compounds and mechanical response in culms of two different ages of Guadua angustifolia Kunth. Madera y Bosques, 20(2), 87-64. https://www.scielo.org.mx/scielo.php?script=sci_arttext&pid=S1405-04712014000200008
Tayeb, A., Amini, E., & Tajvidi, M. (2018). Cellulose nanomaterials-binding properties and applications: A review. Molecules, 23(10), 2684. https://doi.org/10.3390/molecules23102684
Taipale, T., Österberg, M., Nykänen, A., Ruokolainen, J., & Laine, J. (2010). Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength. Cellulose, 17, 1005-1020. https ://doi.org/10.1007/s1057 0-010-9431-9
Technical Association of the Pulp and Paper Industry (TAPPI) (1992). TAPPI T404 cm-92. Tensile breaking strength and elongation of paper and paperboard (using pendulum-type tester). TAPPI.
Technical Association of the Pulp and Paper Industry (TAPPI) (1993). TAPPI T236 cm-06. Kappa number of pulp. TAPPI. https://webstore.ansi.org/Standards/TAPPI/TAPPI236om06
Technical Association of the Pulp and Paper Industry (TAPPI) (1996). TAPPI T460 om-21. Air resistance of paper (Gurley method). TAPPI. https://webstore.ansi.org/Standards/TAPPI/TAPPIANSI460om21
Technical Association of the Pulp and Paper Industry (TAPPI) (1997). TAPPI T411 om-98. Thickness (caliper) of paper, paperboard, and combined board. TAPPI.
Technical Association of the Pulp and Paper Industry (TAPPI) (1998). TAPPI T414 om-12. Internal tearing resistance of paper (Elmendorf-type method). TAPPI. https://webstore.ansi.org/Standards/TAPPI/TAPPI414om12
Technical Association of the Pulp and Paper Industry (TAPPI) (1998). TAPPI T410 om-98. Grammage of paper and paperboard (weight per unit area). TAPPI. https://webstore.ansi.org/Standards/TAPPI/TAPPI410om19
Technical Association of the Pulp and Paper Industry (TAPPI) (2006). TAPPI T205 sp-18. Forming handsheets for physical tests of pulp. TAPPI. https://webstore.ansi.org/Standards/TAPPI/TAPPI205sp18
Thomas, P., Duolikun, T., Rumjit, P., Moosavi, S., Wei, C., Rafie, M., & Bey, L. (2020). Comprehensive review on nanocellulose: Recent developments, challenges and future prospects. Journal of the Mechanical Behavior of Biomedical Materials, 110, 1-21. https://doi.org/10.1016/j.jmbbm.2020.103884
Tozluoğlu, A., Özyurek, Ö., Çöpür, Y., & Özdemir, H. (2015). Integrated production of biofilm, bioethanol, and papermaking pulp from wheat straw. BioResources, 10(4), 7834-7853. http://dx.doi.org/10.15376/biores.10.4.7834-7853
Zeng, J., Zeng, Z., Cheng, Z., Wang, Y., Wang, X., Wang, B., & Gao, W. (2021). Cellulose nanofibrils manufactured by various methods with application as paper strength additives. Scientific Reports, 11(1), 11918. https://doi.org/10.1038/s41598-021-91420-y
Zhang, W., Johnson, R., Lin, Z., Chandoha, C., Zink-Sharp, A., & Renneckar, S. (2013). In situ generated cellulose nanoparticles to enhance the hydrophobicity of paper. Cellulose, 20(6), 2935-2945. https://doi.org/10.1007/s10570-013-0062-9
Cómo citar
APA
ACM
ACS
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Descargar cita
Licencia
Derechos de autor 2024 Colombia forestal
Esta obra está bajo una licencia internacional Creative Commons Atribución-CompartirIgual 4.0.
Colombia Forestal conserva los derechos patrimoniales (copyright) de las obras publicadas, y favorece y permite la reutilización de las mismas bajo la licencia Creative Commons Atribución-CompartirIgual 4.0 Internacional por lo cual se pueden copiar, usar, difundir, transmitir y exponer públicamente, siempre que:
Se reconozcan los créditos de la obra de la manera especificada por el autor o el licenciante (pero no de una manera que sugiera que tiene su apoyo o que apoyan el uso que hace de su obra).